HIDE system

The HIDE system features a concealed attaching system where no screws are visible from the outside. For a better optical effect, the design is suitable for thinner and lighter table tops.

Model Overview

HIDE-HA

The HA model is connected by profiles in a closed circle, where the upper bar is shorter than the lower one and indicates the shape of the letter A. The side vertical profiles are clamped at an angle.

HIDE-HIFE 70/30

The HIFE 70/30 model indicates the shape of a trapezoid, with an upper horizontal rectangular profile and upright sides welded at an angle. The profiles are rectangular, placed at a diagonal angle outwards and lengthwise. The leg clamp is quite far from the outer edge of the table top.

HIDE-HIFE 50

The HIFE 50 model indicates the shape of a trapezoid, with an upper, transverse, rectangular profile and vertical round ones. The vertical profiles are placed at a diagonal angle outwards and lengthwise. The table top is always attached with an overhang.

HIDE-HU

The HU model is connected by profiles in a closed circle, where the upper bar is wider than the lower one and indicates the shape of the letter U. The side vertical profiles are clamped at an angle. All profiles are rectangular.

HIDE features

The HIDE system features a look with an emphasis on concealed attaching, no visible screws from the outside, and the use of a minimum number of screws with maximum system strength. It is possible to choose different dimensions of profiles depending on the design of the furniture.